2020 Clean Diesel Irrigation Engine Rebate Selectee Information
This information is provided by the Nebraska Department of Environment and Energy to assist the public and regulated community.
Form #: 20-033 Applications and Forms Revised: 5/21/21

All project requirements must be completed and

all rebate documentation must be submitted by August 31, 2022.

Use the information provided here and the downloadable forms listed above to plan and complete your 2019 Nebraska Clean Diesel Program Irrigation Engine Rebate project.

REIMBURSEMENT TIMELINE: By August 31, 2022, the selectee must:
  1. Accept delivery of the new electrical equipment and have it installed and operational;
  2. Scrap the old diesel engine in accordance with the program requirements described below; and
  3. Submit the Request for Reimbursement Form, the Final Report Form, Certificate of Engine/Chassis Destruction form, MBE-WBE Form, and all required supporting documentation.

  • Diesel irrigation engines must be replaced by an electric motor or by connecting an existing submersible pump to the electric grid.
  • The replacement equipment must perform the same function in the same location as the original engine.

  • The new equipment cannot be used to expand the applicant’s current inventory; it must replace a diesel engine that is currently operational and in use. The replaced engine must be disabled (scrapped) within 90 days of replacement.
  • The rebate recipient must maintain ownership of the new equipment for at least five years from the date of purchase. If the new equipment is sold before the end of the three-year period, moved out of state, or used for purposes other than what is allowed under this program, the rebate recipient must inform NDEE and may be required to return up to the full amount of the rebate to NDEE. The amount required to be returned is at the discretion of NDEE, and will be determined on a case-by-case basis.
  • Installation must be performed by a licensed electrical contractor.
  • Recipients will be required to file annual reports of operating hours for the duration of the agreement.

The old engine being replaced must be scrapped (permanently disabled) within 90 days of replacement and prior to submission of the reimbursement request to NDEE. Scrappage consists of cutting, drilling, or punching a 3” by 3” hole completely through the wall of the engine block.

Scrappage may be completed by the rebate recipient, by a salvage yard, or by a similar service, provided all scrappage requirements have been met and all necessary documentation is provided. Alternative scrappage methods require approval from NDEE and EPA Region 7. Equipment components that are not part of the engine may be salvaged from the engine being replaced. The engine may be sold for scrap metal. Salvage proceeds may be retained by the rebate recipient, but must be reported to NDEE as program income.

The following documentation of scrappage is required and must be submitted prior to or with the reimbursement request.
U.S. EPA Diesel Emission Reduction Program Certificate of Engine/Chassis Destruction form signed by the party responsible for dismantling the vehicle, and including:
  • The name and address of the dismantler
  • Identification of the old engine including model year and engine serial number
  • The dates the engine was accepted and scrapped by the dismantler.

Photographs (with labels or explanatory captions) of:
  • The engine label(s) that include:
    • Engine serial number;
    • Engine family identifier;
  • Engine block prior to hole being cut;
  • Engine block showing the 3” by 3” hole; and
  • Other photos as needed.

After you have received and installed the new equipment and have scrapped the old engine, you must submit the following documentation to receive reimbursement:
  • Completed Request for Reimbursement Form (download from link above);
  • Completed Final Report Form (download from link above);
  • Completed MBE-WBE form;
  • Photo of the wellsite, new motor, and motor serial number plate (if applicable);
  • Copies of all purchase orders;
  • Copies of all paid invoices;
  • Copy of proof of payment (e.g., cancelled check front and back, credit card payment receipt, or bank statement showing that the check was cashed); and
  • Scrappage documentation (see above).

Reimbursement requests may be submitted electronically by e-mail or in hard-copy by mail. Reimbursement forms and documentation may be assembled into a PDF file for easy e-mail submission.

For electronic submission, please e-mail to:

For hard-copy submission, please mail to:
Nebraska Clean Diesel Rebate Program
Nebraska Department of Environment and Energy
P.O. Box 98922
Lincoln NE 68509-8922

Questions? Email us at NDEE.AirQuality@nebraska.gov